Add thermal imaging capabilities to any weapon system or equipment with a picatinny rail. This direct-mount clamp attaches your AGM thermal imager securely to standard picatinny rail sections, providing auxiliary thermal detection for hunting, recording, or tactical applications.

Mount your thermal imager to a primary or auxiliary rifle rail for quick transitions between thermal and night vision, or use it to record hunts and outdoor activities in thermal. The secure two-lug design prevents sliding under recoil, keeping your thermal stable and properly positioned during use.

This mount features modified geometry with clipped corners and altered recoil lugs, providing clearance for components around the Pard 007s clip-on night vision unit. This allows you to run both thermal and the Pard 007s on the same rail system without interference.

Installation is straightforward. Attach the mount to your thermal imager using the integrated stainless steel screw (requires only a slotted screwdriver or coin), then secure the clamp to your picatinny rail with a 2.5mm hex key. The mounting screw remains captured in the clamp when not attached to your thermal, so you won't lose it in the field.

Key Features:

• Compatible with: All AGM Asp and Taipan series thermal imagers, including Asp-Micro, TM10-256, TM15-256, TM15-384, TM19-384, TM25-384. Supports original Taipan series (V1) and all V2 Taipan models

• Secure mounting: Two recoil lugs prevent sliding during recoil

• Pard 007s compatible: Modified geometry provides clearance when mounted above Pard 007s clip-on night vision

• Quick installation: Attaches to thermal with slotted screwdriver or coin; mounts to picatinny rail with 2.5mm hex key (not included)

• Retained mounting screw: Clamp screw stays captured in mount when not in use

• Durable materials: 20% carbon fiber reinforced polyamide with metal-on-metal threaded components

• Lightweight: Only 35 grams including hardware

What's Included: Picatinny clamp with integrated stainless steel attachment screw for thermal imager

Note: 2.5mm hex key required for rail attachment (not included).