Glass
This page offers a variety of optical products and accessories to enhance clarity, performance, and precision.
AGM Thermal Rail Adapters
AGM Thermal Rail Adapters
Extend your thermal capabilities with our custom AGM mounts. Thermal imaging presents unique challenges and opportunities for shooters. While thermal imagers excel at target detection, their lower resolution can make target identification difficult. Our range of mounts for AGM thermal imagers offers solutions to integrate thermal capabilities with your existing equipment, enhancing overall effectiveness.
Product Range:
Picatinny Clamp
Picatinny Clamp (offset)
Dovetail Clamp (offset)
Picatinny Rail
Arca Swiss Rail
Key Features:
Compatibility: All mounts are compatible with AGM Asp and Taipan series thermal imagers, including Asp-Micro, TM10-256, TM15-256, TM15-384, TM19-384, TM25-384, etc. We support the original Taipan series (V1) as well as all new V2 Taipan models.
Secure Attachment: Each mount attaches to your AGM thermal imager via a stainless steel screw mount.
Durable Construction: Built from 20% carbon fiber reinforced polyamide, our mounts offer exceptional toughness and lightweight performance. Metal-on-metal threaded components ensure durability and reliability.
Easy Installation: Installation is quick and straightforward, requiring only a slotted screwdriver or coin to attach the thermal imager to the mount.
Whether you're integrating your AGM thermal with existing rifle optics, adding accessories to your thermal imager, or setting up for stable observation, our mounts offer the versatility and reliability you need. Not sure which picatinny clamp to go with? Try the offset-long variant, for the fastest transitions between thermal and your scope.
Note: Some photos show older Picatinny Clamp variant before the “Pard-Mod” variant with the clipped corners but now the one with the clipped corners is the default as it’s just better.
Mount-Specific Features:
Picatinny Clamp (Standard):
Attaches your AGM thermal to standard picatinny rail sections on rifles and other equipment.
Features two recoil lugs to prevent sliding under recoil.
Requires a 2.5mm hex key (not included) for secure attachment to picatinny rails.
Mounting screw is retained within the mount when not in use.
Ideal for mounting thermal to a primary or auxiliary rifle rail, allowing quick transition between thermal and night vision.
Picatinny Clamp (Pard-Mod):
Specifically designed to clamp onto Pard clip-on digital night vision units. (works with standard picatinny rails too)
Modified geometry with clipped corners and altered recoil lugs to provide clearance for components around the Pard 007s small rail segment.
Requires a 2.5mm hex key (not included) for secure attachment.
Mounting screw is retained within the mount when not in use.
Ideal for mounting above the Pard night vision unit, allowing quick transition between thermal and night vision.
Picatinny Clamp (offset):
Attaches your AGM thermal to standard picatinny rail sections, positioning thermal adjacent to your primary scope for simultaneous target acquisition.
Exceptionally low profile design utilizes "dead" rail space beneath existing optics with only 8mm clearance required above rail.
Enables dual-eye operation: locate targets with thermal using one eye, then instantly engage through your scope with the other eye while rifle remains on target.
Features two recoil lugs to prevent sliding under recoil.
Requires a 2.5mm hex key (not included) for secure attachment to picatinny rails.
Left and right offset versions available. (right handed shooters use left offset and vice versa)
Horizontal offset is 57mm or 75mm center to center (standard or long).
Ideal for rapid transitions between thermal target acquisition then target engagement through an optical scope.
Dovetail Clamp (offset)
Attaches your AGM thermal to standard 11mm dovetail rail sections, positioning thermal adjacent to your primary scope for simultaneous target acquisition.
Exceptionally low profile design utilizes "dead" rail space beneath existing optics with only 8mm clearance required above rail.
Enables dual-eye operation: locate targets with thermal using one eye, then instantly engage through your scope with the other eye while rifle remains on target.
Requires a 2.5mm hex key (not included) for secure attachment to dovetail rails.
Left and right offset versions available. (right handed shooters use left offset and vice versa)
Horizontal offset is 75mm center to center.
Ideal for rapid transitions between thermal target acquisition then target engagement through an optical scope.
Picatinny Rail Mount:
Adds a picatinny rail section to your AGM thermal imager.
Allows attachment of picatinny-compatible accessories like IR laser designators.
Ideal for two-operator scenarios (e.g., spotter operates thermal and uses IR laser to designate targets, shooter operates under night vision).
Arca Swiss Rail Mount:
Adds an Arca Swiss rail to your AGM thermal imager.
Compatible with standard tripod heads featuring arca swiss clamps (the most common tripod mount).
Ideal for stable, hands-free operation on tripods or other arca swiss-compatible supports.
*Thermal imager not included, but you already knew that.